Connecting The Remote Control - Candy HDC110IN Bedienungshandbuch

Connecting the remote control

·A New remote control has to establish a new connection to the cooker hood
when used for first time. One remote control could possibly control several
cooker hoods at the same time.
Connection process between remote control and cooker hood
·Press for 5 seconds within 15 seconds of cooker hood plug in, the
indicators light begin flashing, the cooker hood is in connection mode, press
any bottom on remote control to confirm the connection. The connection
process finished and the remote control can be used for speed selection,
lighting and timer setting.
·If you want to connect again, you will need to clear the code that has been
set up previously.
·To clear the code, press for 5 seconds, the indicators light begin
flashing, the cooker is in connection mode. Then, press again for 5
seconds, the previous connection code is cleared.
·When the previous code has been cleared, the cooker hood back to standby
mode, press for 5 seconds, the indicate light flashing from one
button to another ,the cooker hood it in connection mode, then, press any
bottom on remote control to confirm the connection.
·The remote control can set up the turning on/ increasing motor speed,
turning off/Decreasing motor speed, timer on/off and light on/off functions.
7