Cd Synchronized Recording - Yamaha cdx 396 Bedienungsanleitung

CD SYNCHRONIZED RECORDING

This unit can automatically synchronize a tape deck's recording with CD play. With this function, you can record a CD on tape
easily and precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual
to find out whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can simultaneously receive the signals from this unit's
remote control.
3
SYNCHRO
SPACE
TAPE
3
1
Press OPEN/CLOSE to open the disc tray, and load
a disc.
OPEN/
CLOSE
2
Load a tape on the tape deck.
* The peak level search function of this unit is useful for
adjusting recording level on the tape deck. (Refer to
page 20.)
3
Press SYNCHRO.
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this state, the time display on this unit flashes on and off.
If necessary, select a desired track by pressing a numeric
button or / (
5
or
OPEN/
1
DIMMER CLOSE
TEXT/
TIME PEAK
CLEAR PROG
1 2 3
4 5 6
7 8 9
+
0 I0 INDEX
SYNCHRO
SKIP/SEARCH ).
REPEAT
3
4
Press .
Both CD play and tape deck recording begin.
* CD play begins shortly after the recording.
5
If you want to stop recording temporarily and restart
recording from a desired track, stop this unit by
pressing , and the tape deck as well, then follow
steps 3–4 again.
To cancel synchronized CD-tape recording
function
Press .
Notes
● To finish or stop the recording, make proper operations on the
tape deck. (For details, please refer to the owner's manual of
the tape deck.)
● Programmed sequence of tracks can also be recorded with this
function instead of recording an entire disc. (Refer to pages
14–15 for the programming procedure.)
● This function can also be used together with the automatic
tape-programming function. (Refer to pages 16–19.)
4
RANDOM
21
E-