Preparing The Product For Use; Inserting / Replacing The Battery - Silvercrest IAN 315409 Bedienungs- Und Sicherheitshinweise

Preparing the product for use

Note: Remove all packaging materials from the
product.

Inserting / replacing the battery

(Fig. B)
Hold the trimmer body
battery compartment cap
until the vertical mark on the battery compartment
cap
8
mer body
Then remove the battery compartment cap
from the trimmer body
Remove the used battery
Insert a new battery type AA (LR6) in the trimmer
body
Indication: Pay attention to the right polarity.
This is indicated on the bottom of the trimmer
body
Put the battery compartment cap
trimmer body
Hold the trimmer body
battery compartment cap
the vertical mark on the battery compartment
cap
8
trimmer body
68 GB/MT
is aligned with the symbol
.
7
.
7
.
7
.
7
is aligned with the symbol
.
7
firmly and turn the
7
counter-clockwise
8
.
7
, if present.
9
8
firmly and turn the
7
clockwise until
8
on the trim-
8
back on the
on the