Operation; Replacing The Blade Head; Changing Attachments For The Trimmer Head - Silvercrest SKHT 1.5 A1 Bedienungsanleitung

__NAS282609_Koerperhaartrimmer_B7.book Seite 10 Mittwoch, 15. Februar 2017 7:01 19
6.

Operation

6.1 Replacing the blade head

The device is supplied with two different blade heads:
• The trimmer head 1 is used with two different attachments for trim-
ming body hair to 3 mm (using the 3 mm attachment 10) or 0.5 mm
(using the 0.5 mm attachment 11).
• The shaver head 9 is used for smooth shaving of body hair.
1. Switch off the device with the on/off switch 3 if necessary.
2. Figure A: rotate the trimmer head 1 / shaver head 9 so that the ar-
row of the lock 2 points to the open lock symbol
3. Remove the trimmer head 1 / shaver head 9.
4. Place the desired blade head (trimmer head 1 or shaver head 9) so
that the arrow points to the open lock symbol
5. Rotate the blade head (1/9) so that the arrow points to the closed
lock symbol .
6.2 Changing attachments for the trimmer
head
WARNING! Risk of injury!
Never use the trimmer head 1 without attachment 10/11.
Do not use the device if parts are damaged.
• Use the 3 mm attachment 10 to trim hair to a length of 3 mm, or as
a preparation for longer hair (longer than 20mm).
• Using the 0.5 mm attachment 11, you achieve a hair length of ap-
prox. 0.5 mm.
1. Figure C: remove any attachment 10/11 currently in place by
gripping it from the sides and carefully pulling it off the trimmer
head 1.
10
GB
.
.