Assembly; Preparing For Use; Inserting / Replacing The Batteries - Silvercrest Z31370A Bedienungs- Und Sicherheitshinweise

Remove the batteries from the device if they have not been used for
a long period.
Make sure you insert the batteries the right way round (polarity).

Assembly

note: You will need a screwdriver and a drill to assemble the doorbell.
note: Only use the screws and dowels supplied for the assembly of
the device.
Mount the receiver (see Fig. E)
Mount the transmitter (see Fig. F)

Preparing for use

For first time use, please remove the protective foil from the name
plate of the transmitter.
12

Inserting / replacing the batteries

Insert the batteries to provide power to the device before preparing
it for use.
CAUTIOn! Use the above-indicated battery types only. Failure to
observe this advice may result in damage to the product.
Safety / Assembly / Preparing for use
GB/MT 53