Grundig GSBS13320FX Benutzerhinweise Seite 15

1.
Connector (1 piece): Used to
attach the water hose to the
rear of the product.
2.
Faucet adapter (1 piece): Used
for connection to the cold water
mains.
3.
Porous filter (1 piece)
4.
Hose clip (3 pieces): Used to fix
the water hose on the wall.
5.
Filter connecting apparatus (2
pieces): Used to fix the filter on
the wall.
6.
Water filter (1 piece): Used
to connect the product to the
water mains. Water filter is not
necessary when using carboy
connection.
1.
Connect the faucet adaptor to
the water mains valve.
2.
Determine the location to
fix the external filter. Fix the
filter's connecting apparatus (5)
on the wall.
3.
Attach the filter in upright
position on the filter connecting
apparatus, as indicated on the
label. (6)
4.
Attach the water hose
extending from the top of the
filter to the product's water
connection adaptor, (see 3.6.)
After the connection is established,
it should look like the figure below.
CZ
DA
SV
NO
13