Operating The Appliance; Switching On; Power Mode; Temperature Mode - CASO DESIGN TC 2400 Original Bedienungsanleitung

Warning
► In order to prevent overheating do not place any aluminium foil or metal panels on the
appliance surface.
► Do not touch the hot surface of the ceramic hob.
Although the induction cooktop itself does not produce any heat during the cooking
process, the temperature of the cookware does heat up the hob.
► Keep the hob and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the hob, this liquid can vaporise and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.

15.4 Operating the Appliance

15.4.1

Switching On

Plug the power plug into a suitable outlet.
The temperature of the cooker plate surface displayed: is the temperature of the surface of
the induction cooker lower than 50°C, the display shows „L". When the temperature of the
cooker plate surface is over 50 °C, it is displaying „H". An acoustic signal sounds. All LEDs
will light up for 1 seconde. Now the device is in standby mode.
Place a suitable cooking pot with its contents to be cooked on the centre on the hob
(Ø 140 mm - 260 mm). Now press the On/Standby button to turn on the device.
15.4.2

Power Mode

 After that press the function key Level. The preset power stage "8" is selected and the
device turns on. With the + / - buttons, you can change the level from 1-12 at any
time.
Please note
► We recommend to select the function "Power Mode" with levels form 1-12 in case of
steaming food or boiling water for example.
15.4.3

Temperature Mode

► If the external thermometer is connected, then its functions will be used.
Internal Thermometer:
 Press the Function Key Temp to select the temperature. The preset temperature stage
"120°C" is selected.
Please note
44