Timer; Switching Off; Cleaning And Maintenance - CASO DESIGN TC 2400 Original Bedienungsanleitung

 When you press button Temp then the desired set-point temperature is displayed and
can be changed.
 When the desired set-point temperature is reached, the heat supply is stopped and the
display shows "END".
 In addition you can control the cooking time with the timer:
a) If the desired core temperature is reached but the programmed time has not yet
expired, then the heat supply will be stopped and the display shows "END".
b) If the programmed time is reached, but the desired core temperature was not yet
reached, then the device switches off automatically.
 You can switch to power mode with button Level.
 Please note that the two functions of Level and Temperature can be chosen as
alternative. The most recently selected function is active.
Please note
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C.
15.4.4

Timer

 Press button Timer, then use +/- buttons to set the operating time from 0-180 minutes
in 1-minute intervals. Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
15.4.5

Switching Off

You can use On/Standby button to switch the device off. When the temperature of the
cooker plate surface is lower than 50°C, the display shows „L". When the temperature of
the cooker plate surface is over 50 °C, it is displaying „H".
► Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
► Do not operate the device if it is damaged in any way or does not function properly.
► The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Please note
46