Herunterladen Inhalt Inhalt Diese Seite drucken

Operating The Appliance; Switching On; Power Mode; Powersharing Mode - CASO DESIGN Pro Menu 2400 Original Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Warning
► In order to prevent overheating do not place any aluminium foil or metal panels on the
appliance surface.
► Do not touch the hot surface of the ceramic hob. Although the induction cooktop itself
does not produce any heat during the cooking process, the temperature of the
cookware does heat up the hob.
► Keep the hob and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the hob, this liquid can vaporise and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.

14.4 Operating the Appliance

14.4.1

Switching On

 Plug the power plug into a suitable outlet. The temperature of the cooker plate
surface displayed: is the temperature of the surface of the induction cooker lower
than 50°C, the display shows „L". When the temperature of the cooker plate surface
is over 50 °C, it is displaying „H". An acoustic signal sounds. Now the device is in
standby mode.
 Place a suitable cooking pot with its contents to be cooked on the centre on the hob
(Ø 120 mm - 260 mm). Now press the ON/STANDBY switch 1. to turn on the PRO
MENU 2400 . The control lamps "Level" and "Temp" blink and an acoustic signal
sounds.
14.4.2

Power Mode

 Press the function key 4. The preset power stage "8" is selected and the device turns
on. With the + / - Keys (5+6), you can change the settings at any time in a range from
1 – 12.
Please note
► We recommend to select the function "Power Mode" in case of steaming food or
boiling water for example. So the overheating protection "E05" will not be activated.
14.4.3

Powersharing Mode

 If both induction fields are operated, the boards will share over power sharing
function levels as follows:
left
12
11
right
0
0
caso Pro Menu 2400
10
9
8
7
6
7
8
9
10
10
5
4
3
2
1
10
10
10
10
10
38

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2229

Inhaltsverzeichnis