Fitting The Hob Into A Worktop - Sharp KH-9I26CT01-EU Bedienungsanleitung

· The power cable length should not
exceed 2 metres.
Fitting the hob into a work
surface
· The hob can be inserted into any
worktop provided it is heat resistant up
to at least 90ºC.
· Create an opening with the
dimensions shown in the picture below
and on the next page.
· The induction hob may be built in 25
to 40 mm thick worktops.
Neighbourhood walls
Wood
Concrete or ceramic tiled
A [mm] B [mm]
60 150
25 40
A
Min.
35mm
Min. Gap 5mm Min. Gap 5mm
Neighbourhood walls
Wood
Concrete walls
Min. B
EN - 14
Min. 10mm Min. 10mm
View A
View A
A [mm] B [mm]
60 150
25 40
Min. A
Min. 20mm