Prior To First Use - Redmond Multicooker RMC-250 Bedienungsanleitung

7. "—" button is used to reduce the hour and minute value in the current time
adjustment mode, cooking time adjustment mode, "Отсрочка старта" adjustment
mode; to reduce the temperature value (in all automatic programmes except
"ЙОГУРТ"); to select an automatic cooking programme.
8. "+" button is used to increase the hour and minute value in the current time
adjustment mode, cooking time adjustment mode, "Отсрочка старта" adjustment
mode; to increase the temperature value (in all automatic programmes except
"ЙОГУРТ"); to select an automatic cooking programme.
9. "ОК" button is used to confirm the adjustments when exiting the cooking
programme selection mode, time and temperature adjustment mode, and the
current time adjustment mode.
Display A3
1. Temperature value indicator (in all automatic programmes except "ЙОГУРТ" and
"ЭКСПРЕСС").
2. Cooking progress bar indicator.
3. Automatic cooking programme indicators.
4. Timer / current time indicator / "Time Delay" indicator.
5. Current time/"Time Delay" adjustment modes indicator.
6. "Cooking time" indicator.
7. "Reheat" /"Keep Warm" functions indicator.
REDMOND RMC-250 Multicooker is equipped with a touch control panel and an LCD
display with 3 backlight colours indicating different modes of operation.
Backlight colour Mode of operation
The "Time Delay" function is in progress, the display shows the Timer
BLUE
value and the "Отсрочка старта" indicator.
A cooking cycle is in progress, the display shows the cooking time
GREEN
countdown, the "Cooking time" indicator is lit.
The "Reheat" function is in progress, the display shows the "Reheat"
ORANGE
time count up.
I. PRIOR TO FIRST USE
Carefully remove the Multicooker and its accessories from the packaging. Dispose of all
packaging materials.
Keep all warning labels, including the serial number identification label located on the
housing. The absence of the serial number will deprive you of your warranty benefits!
Wipe the housing of the appliance with a soft, damp cloth, wash inner bowl, and let dry.
Clean the appliance, to prevent extraneous odours during the first use (refer to the
"General Maintenance Guidelines").
After transportation or storage at low temperature allow the appliance to stay at
room temperature for at least 2 hours before use.
II. OPERATING THE MULTICOOKER
Before Operating
Place the appliance on a flat, stable, and hard surface away from wallpaper, decorative
coatings, or any other objects or cabinets that could be damaged by steam, humidity, or
high temperatures.
Before operating, make sure that the outer and inner parts of the Multicooker have no
dents, cracks or any other visible damages. There should not be any obstructions between
the heating element and the bowl.
To Reset to Default Settings
REDMOND RMC-250 Multicooker is equipped with a non-volatile memory. If a power
failure occurs the appliance will store the current settings in the non-volatile memory.
To reset to default settings press and hold down the "Меню" button. A signal is heard,
the appliance is reset.
12
To Adjust Current Time
Plug in the appliance. Press and hold down the "+" or "—" button. "+", "—", and the "ОК"
buttons and current time indicator on display will flash. Use the "+" button to increase
and the "—" button to reduce the current time value. After the maximum value is reached
the adjustment starts from the minimum value. Press and hold the corresponding
button down to scroll through the digits. Select the hour value, press the "ОК", and select
the minute value. After the current time is set press the "Подогрев/Отмена".
To Adjust Cooking Time
REDMOND RMC-250 Multicooker enables to adjust the default cooking time of each
programme. Adjustment range and interval depend on the selected cooking programme.
To adjust the cooking time:
1. Select an automatic cooking programme by pressing the "Меню" button. The "+",
"—", "Старт/Автоподогрев", and "ОК" button indicators will flash. Press the "+" or
"—" button repeatedly until the display shows the required cooking programme
indicator. As you navigate through the menu the display will show the default
cooking time of each programme.
2. Press the "ОК" ( the corresponding button indicator and the "Cooking time" indica-
tor light up) and adjust the cooking time of the selected programme. The "+", "—",
"Старт/Автоподогрев", and "t°С" button indicators and the "Cooking time" indicator
on the display will flash. If the "Отсрочка старта" function is applicable for the
selected cooking programme The "Отсрочка старта" button indicator will flash.
3. Use the "+" button to increase and the "—" button to reduce the time value.
Select the hour value, press the "ОК", and select the minute value. Press and
hold the corresponding button down to scroll through the digits. After the
maximum value is reached the adjustment starts from the minimum value.
4. To cancel the adjustments press the "Подогрев/Отмена" and start over.
To Delay the Programme
The "Отсрочка старта" function enables programmeming the appliance to start cooking
at a specific time. A cooking cycle can be delayed between 10 minutes and 24 hours in
10 minute increments.
1. Select an automatic programme and adjust the cooking time. Press the "Отсрочка
старта" button to delay the programme (the button indicator lights up, the display
will show the "Отсрочка старта" adjustment mode indicator). The "+", "—", "ОК",
"Старт/Автоподогрев", and "t°С" button indicators will flash.
If the selected programme is "ЙОГУРТ", "t°С" button will not flash (the default tem-
perature of the programme cannot be adjusted).
2. Use the "+" and "—" buttons to adjust the hour value (press the "+" to increase
and "—" to reduce the value). Press and hold the corresponding button down to
scroll through the digits. After the maximum value is reached the adjustment
starts from the minimum value.
3. After the hour value is adjusted press the "Отсрочка старта" button. Use the "+"
and "—" buttons to adjust the minute value.
4. To cancel the adjustments press the "Подогрев/Отмена" and start over.
"Keep Warm" Function
The function automatically activates at the end of a cooking cycle and keeps the dish
warm at 75-80°С for up to 24 hours. "Старт/Автоподогрев" button indicator goes off,
"Подогрев/Отмена" button is flashing slowly. Display shows "Keep Warm" count up.
Preliminary Deactivation of the "Keep Warm"
To disable "Keep Warm" in the beginning of cooking cycle press and hold down the
"Старт/Автоподогрев" button until the "Подогрев/Отмена" button indicator goes off. To
reactivate the function repress and hold down the "Старт/Автоподогрев" button, the
"Подогрев/Отмена" button indicator begins to flash slowly.
"Reheat" Function
To reheat cold food:
1. Follow steps 1-2 of the "Standard Operating Procedure for Automatic Pro-
grammes".
2. Press and hold down the "Подогрев/Отмена" button. The button indicator will
flash slowly, the reheating cycle will begin. Display shows "Reheat" count up.
The appliance will warm the food up to 75°С and will maintain the temperature
for up to 24 hours. Press the "Подогрев/Отмена" button to disable the function
if necessary (the button indicator goes off).
"МАСТЕРШЕФ" Function
The function is not applicable for "ЙОГУРТ" and "ЭКСПРЕСС" programmes.
The "МАСТЕРШЕФ" function allows to enter up to 10 time and temperature adjustments
during a cooking cycle and to save the entire sequence of adjustments to the memory
of the appliance, replacing the initial programme with the new one. The cooking tem-
perature can be adjusted between 35°C and 170°С in 5°С increments, and the cooking
time can be adjusted 1 minute and 15 hours in 1 minute increments.
The cooking time of the "ЖАРКА" and "ФРИТЮР" programmes must not exceed 2
hours, to prevent overheating.
Enabling/disabling the "Keep Warm" function, without changing the cooking time or
temperature is not considered to be an adjustment.
The "МАСТЕРШЕФ" function can be an extremely useful tool when following compli-
cated recipes, requiring multi-stage cooking techniques (beef-stroganoff, soups,
pasta, jams, etc.).
To Adjust Cooking Temperature
1. Press the "t°C" button during a cooking cycle. The temperature value indicator
on the display will begin to flash.
2. Adjust the temperature. Use the "+" button to increase and "–" to reduce the
temperature. Press and hold the corresponding button down to scroll through
the digits. After the maximum (minimum) value is reached the adjustment starts
from the beginning.
3. To save the adjustments do not press any button for 5 seconds.
To Adjust Cooking Time
1. Press the "t°C" button twice during a cooking cycle. The time value indicator on
the display will begin to flash.
2. Adjust the time. To increase the time value in 1 hour increments press the "+"
button, in 1 minute increments press the "–" button. Hour and minute value
increase irrespective from each other. After the maximum value is reached the
adjustment starts from the minimum value. Press and hold the corresponding
button down to scroll through the digits.
3. To save the adjustments do not press any button for 5 seconds.
If the cooking time is set to 00:00, the cooking cycle will be stopped.
Do not enter more than 1 adjustment within a minute, because the appliance will
only save the last adjustment made. If the recipe requires to change both time and
temperature, press the "t°C" button after the time or temperature adjustment. The
appliance will save both adjustments as one.
To Save the Adjusted Programme
Within 3 minutes after a cooking cycle is complete you can save the adjusted programme
to the memory of the appliance, replacing the initial programme with the new one.
Display shows a 3-minute count down in 1 second increments.
To save the programme, press the "Отсрочка старта" button. To exit without saving press
the "Подогрев/Отмена".
To Run the Adjusted Cooking Programme
When an adjusted cooking programme is selected, the display shows "----" instead of a
cooking time value.
Select the programme and press the "Старт/Автоподогрев" button. During a cooking
cycle, a short audible signal is produced to indicate each time and temperature adjust-
ment. If the time or temperature of a recalled programme were adjusted once again,
the appliance will offer to save new programme to the memory after the cooking cycle
is completed.
Saved programmes can be adjusted in the same manner as automatic ones. How-
ever, new adjustments made to the programme, will cancel all other adjustments that
were supposed to follow.