Herunterladen Inhalt Inhalt Diese Seite drucken

Product Warranty - Redmond RMC-PM4506 Bedienungsanleitung

Electric pressure cooker
Vorschau ausblenden Andere Handbücher für RMC-PM4506:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
VII. BEFORE CONTACTING SERVICE CENTER
Displayed
Error Description
Error Code
Е1
Pressure sensor error
System error, possible control board or
Е3
heating element malfunction
Е5
Device became overheated
Problem
Possible Cause
The unit does not switch on
Voltage supply failure
Sealing ring is missing or improperly positioned Position sealing ring properly
The device fails to seal
hermetically. Steam escapes
Sealing ring is dirty
from the rim of the lid
Sealing ring became deformed
Voltage supply interruption
There is an obstruction between cooking bowl
and heating element
Dish is taking too long to cook
The bowl is not properly positioned
Heating element is dirty
In case you didn't manage to eliminate the defects, please, refer to the authorized service
centre.
VIII. PRODUCT WARRANTY
We warrant this product to be free from defects for a period of 2 years from the date of
purchase. If the appliance fails to operate properly within the warranty period and is found
to be defective in material or workmanship, we will repair or replace it. This warranty comes
into force only in case the purchase date can be proved with an original warranty service
coupon containing a serial article number and accurate impress of the company of the seller.
This limited warranty does not cover damage caused by the failure to use this product for
its normal purpose or in accordance with the instructions on the proper use and maintenance
of the product, or any kind of repair works. Do not try to disassemble the device and keep all
package contents. This warranty does not cover normal wear of the device and its parts (filters,
bulbs, non-stick coating, sealing rings, etc.).
Service life and the applicable product warranty period start on the date of purchase or the
date of manufacture (if the purchase date cannot be established).
You can determine manufacture date by the serial number on the identification label on the
housing of the device. The serial number consists of 13 digits. The 6th and 7th digits of the
serial number refer to the month, whereas the 8th digit refers to the year of manufacture.
Error Handling
Unplug the unit and let it cool down. Close the lid tightly. If this
does not eliminate the error, contact an authorized service center
Contact an authorized service center
Unplug the device and let it cool down
Solution
Check the voltage supply
Clean sealing ring
Replace sealing ring
Check the voltage supply
Remove the obstruction
Position the bowl properly
Unplug the unit and let cool down. Clean
heating element
Service life of the product, established by the manufacturer is 5 years from the date of
purchase, provided that the appliance is used and maintained in accordance with the user
manual and applicable technical standards.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the applicable
collection point for the recycling of electrical and electronic equipment. Do not
throw away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste but must be
collected separately. Municipal disposal of recyclable wastes is free of charge. The owners
of old appliances are required to bring it to a waste facility centre. With this little extra effort,
you can help to ensure that valuable raw materials are recycled and pollutants are treated
as appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU – concerning
used electrical and electronic appliances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recycling of used appliances as
applicable throughout the EU.
RMC-PM4506
GBR
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis