Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.6 HOW TO DISPLAY CONSUMPTIONS DETECTED BY A LOCAL
PULSE METER (CONNECTED TO THE CP TERMINALS)
If the pulse meter is connected directly to the MODO monitor on the Cp+ and Cp- terminals, select
the Home Page and then
Possible settings are instantaneous (i), daily (d), weekly (w) and monthly (m).
•
Select
to display the daily consumption.
d
From right to left on the page, the today's current is shown in red and -1 indicates the consumption of the
day before today (yesterday).
Check correct operation of the meter and/or correct wiring if the local pulse meter shows an
instantaneous power reading of 9.9 kW.
•
Select
to display the weekly consumption.
w
The consumption of the current week is shown in red and consumption of the previous week is shown next
to –1 and so forth to the third week before the current week.
•
Select
to display the monthly consumption.
..m
28
to access the reading display menu.
i
d
kWh
8
12
- 6
- 5
kWh
50
70
- 3
- 2
1.2 kW
w
m
D
10
8
10
10
- 4
- 3
- 2
- 1
W
56
80
- 1
8
on
DS1717-008
Werbung
Kapitel
Inhaltsverzeichnis
