Gesture Commands; Switching On The Display; Voice Activation - urmet MAX 1717/21 Benutzeranleitung

1.

gEsTurE COMMANDs

The video door phone Ref. 1717/21 allows the activation of some of the video door phone functions
through gesture commands. By moving your hand in front of the Webcam it is possible, for example, to
answer a call or open the pedestrian door without pressing the keys on the display.
To use gesture commands, enable the function in the video door phone configuration menu (refer to
chapter Abilitazione comandi gestuali).
After enabling the function in the upper bar of the display, the icon
ATTENTION! Before using a gesture command, it is necessary to move near the video door phone and
say the vocal command "hey urmet".
To activate functions that require more that 1 hand movement, the next movement has to be made within
1 second from the previous one.
Below are the instructions for using the gesture commands to activate the functions.
1.1

sWITChINg ON ThE DIsplAy

• Move near the video door phone and say the vocal command "hey urmet".
1.2

VOICE ACTIVATION

It is possible to activate voice mode in the following 2 ways:
1. Waiting for a response (while receiving a call)
• Pass your hand twice while the video door phone receives a call, the display shows the following
screen and highlights the voice activation icon.
• After a few seconds, communication with the caller is established.
1
Webcam
14
Hey Urmet
BEEP
<1 s
2
BEEP
is shown.
<2 s
<1 s
3
BEEP
4
DS1717-085