Toshiba e-studio230 Bedienungsanleitung Seite 166

JUSTAGEMODUS 08 <e-STUDIO232-283>
Code Justage
Card reader format
1773
information -1
Card reader format
1774
information -2
Card reader format
1775
information -3
-
TOSHIBA TEC Germany IMAGING SYSTEMS GmbH (Trainingscenter Wolfgang Schwarz)
Der Inhalt dieses Manuals ist ohne Gewähr, und vorbehaltlich jeder Änderung
Justage-
Modus RAM Kommentar
bereich
-
ALL SYS
-
ALL SYS
-
ALL SYS
Seite -160-
To access the data in the noncontact
IC card, the Key Information "LLLL"
and the Sector Number "MMMM"
should be set.
The "LLLL" should be set first, and
then
"MMMM".
KP-2003:
LLLL = System code
(hexadecimal number)
MMMM = Service code
(hexadecimal number)
KP-2005:
LLLL = Key information
MMMM =
Sector number
(hexadecimal number)
The data of the block number in the
noncontact IC is set.
KP-2003 = <PPQRSSTU
(hexadecimal number)>
PP = 1st block
Q = 1st block beginning byte
R = 1st block endingbyte
SS = 2nd block
T = 2nd block beginning byte
U = 2nd block ending byte
KP-2005 = <RRBSEbse
(hexadecimal number)>
RR = 00 (Fixed)
B = 1st area block number
S = 1st area beginning byte offset
E = 1st area ending byte offset
B = 2nd area block number
S = 2nd area beginning byte offset
E = 2nd area ending byte offset
* If the 2nd block/area is not used, set
the SSTU to "FFFF" (hexadecimal
number), the bse to"FFF" (hexadecimal
number).
Security key "KKKKKKKKKKKK" (12
digits) <hexadecimal number> in the
[Key Information] of the [Sector
Number] set in the code 08-1773
should be entered.
01.04.2009