Toshiba e-studio230 Bedienungsanleitung Seite 160

JUSTAGEMODUS 08 <e-STUDIO232-283>
Code Justage
Wireless LAN supplicant
1684 Path name for CA self-
certificate
Wireless LAN supplicant
1685
EAP user name
Wireless LAN supplicant
1686
EAP user name
Wireless LAN supplicant
1689
Authentication interval
Wireless LAN supplicant
1690
Holding interval
Wireless LAN supplicant
1691 EAPOL-Start Number of
times of packet retry
Wireless LAN supplicant
1692
Session resume
Wireless LAN supplicant
1693
MAC Frame size
Wireless LAN supplicant
1696 Device file setting for
obtaining random number
Wireless LAN supplicant
1697
CRL directory designation
Wireless LAN supplicant
1699
EAP authentication type
Wireless LAN supplicant
1700
CN name
-
TOSHIBA TEC Germany IMAGING SYSTEMS GmbH (Trainingscenter Wolfgang Schwarz)
Der Inhalt dieses Manuals ist ohne Gewähr, und vorbehaltlich jeder Änderung
Justage-
Modus RAM Kommentar
bereich
-
ALL
-
ALL
-
ALL
30
<30-
ALL
65535>
60
<60-
ALL
65535>
3
ALL
<1-65535>
2
ALL
<1-2>
1398
ALL
<1-1398>
/dev/
ALL
urandom
-
ALL
1
ALL
<1-3>
-
ALL
Seite -154-
This should be the path name in full
where the CA self-certificate is located.
-
(Maximum 255 letters)
This should be the user name when the
-
EAPTLS is used.
This should be the user name when the
-
PEAP is used.
This should be the timeout interval
between EAP responses.
-
30 = 30 seconds
The EAP authentication will start after
having been waited in this period when
M
an EAP failure was received.
60 = 60 seconds
When an EAPOL-Start packet has been
sent and the request ID cannot be
received, this EAPOL-Start packet will
M
be re-sent for the number of times set
in this code.
3 = 3 times
This setting is whether the pre-master
key should be updated or not upon a
TLS renegotiation.
-
1 = Session is resumed
2 = Session is not resumed
This is a MAC frame size used in the
wireless LAN connection. The data is
-
fragmented into this size.
1398 = 1398 bytes
This should be the device file name
which can obtain a seed to initialize the
-
WEP PRNG for xsupplicant.
(Maximum 255 letters)
This should be the path name of the
directory in full where the CRL file is
-
located.
(Maximum 255 letters)
This setting is for the EAP
authentication type which xsupplicant
can authenticate.
-
1 = EAP-TLS 2 = PEAP
3 = EAP-TLS and PEAP
This should be an authentication server
name (basically a domain name in full).
-
(Maximum 255 letters)
01.04.2009