Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

9.4. Mute

Press the MUTE button [27] on the remote control to mute the sound. "MUTE" appears on the
display [2] while the mute function is enabled. Press the MUTE button [27] on the remote
control again to resume the sound output.

9.5. Radio

Switch the Micro Stereo System on and press the Operating mode button [16] multiple times
until the display [2] reads "FM", or press the FM button [31] on the remote control.
Automatic station search
The most convenient way to search for and store radio stations is the automatic scan with auto-
store. Proceed as follows to start the station search:
Press and hold the PRO button [13] on the Micro Stereo System or the PRO button [41]
on the remote control until the station search begins.
The automatic station search always starts at the lowest frequency. Now the entire frequency
range is scanned for strong stations. As soon as a strong station has been found, the frequency
indication on the display [2] briefly stops and the preset where this station has been saved is
shown.
The 30 first found stations are directly saved on the presets 1 to 30.
When the automatic station search is finished the station stored in preset 1 will be tuned in.
Please note that any station presets used will be overwritten.
Manual station search
Keep the ▸l button [7] or the l◂ button [8] on the Micro Stereo System or the ▸▸l button [37]
or l◂◂ button [51] on the remote control pressed for approx. 2 seconds to launch the manual
station search up or downwards. The search will stop when the next station has been found and its
frequency is shown on the display [2].
Manually tuning a station
Besides the automatic station search, you can also tune in a station manually. This allows you to
also tune-in any weaker stations.
To do so, briefly press the ▸l button [7] or l◂ button [8] on the Micro Stereo System or the ▸▸l
button [37] or l◂◂ button [51] on the remote control to increase or reduce the frequency
stepwise. The frequency changes 0.1 MHz each step.
SilverCrest SMBC 30 A1
English - 45

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis