Symbol LS 4071 Schnellstartanleitung Seite 4

2
Test
Aim the scanner away from you and press the trigger. When
you press the trigger, the scanning beam is energized for
approximately 3.0 seconds (default).
Scan
Make sure the symbol you want to scan is within the
scanning range. See the LS 4071 Product Reference Guide.
Also, be certain the scanner is within range of the base
station: 10 feet (3 meters).
The scanner has read the symbol when:
• The yellow LED on the rear of the scanner turns green
for a short period of time after the scanning beam turns
off.
The data has been successfully sent to the base station when:
• You hear a short, high tone beep from the base (if de-
fault beeper settings are selected).
• The yellow LED on the base blinks.
Quick Reference