Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Application, scope of delivery
and accessories
Important notes!
This manual has been specifically compiled for
machine operators. Keep it near the machine for
future reference!
The hook cutter may only be operated
for the intended purpose, with due care as
regards safety, and if the equipment is in proper
working order
if all safety devices are properly mounted
according to the safety instructions in this
manual
after instruction of the operating personnel, who
must also have read and understood the
instructions in chapter 2 "Safety instructions"
(page 2) and chapter 3 "Commissioning and
operational safety" (page 2).
This is necessary in order to prevent incorrect
operation and to enable operators to assess
potential risks accurately.
Never reach into the operating
range of the cutting blades, as
there is a risk of dismemberment!
Always wear goggles or other
effective eye protection!
1.1 Symbols used in this manual
Danger:
Proceed with extreme caution. In the
event of incorrect operation, there is a
risk of injury to operating staff and
other persons. There is also a risk of
damage to the machine.
Information:
This symbol highlights sections in the
text containing important information
and useful hints.
1.2 Proper use
The hook cutter is designed for the cutting of non-
frozen or partially frozen meat (temperature approx.
5° C).
It is suitable for cutting and breaking in large and
Schmid & Wezel
D 75433 Maulbronn
medium-sized meat and poultry processing plants.
EFA Z28: Quartering of beefs
EFA Z28S: Separating of hog heads
The machine is not designed for any other use. If
you wish to use the equipment for other purposes,
first consult Schmid & Wezel GmbH & Co (S&W).
If the machine is used for any other purposes,
please note that there is a greater risk of serious
injury and increased wear to machine parts. The
operator shall be solely liable for any damage arising
from improper use of the equipment.
1.2.1 Residual risks
As the hook cutter is designed for the cutting of
animals, there is a risk of serious injury to persons.
For proper use, the clearance between the cutter
blades may not be reduced. It is therefore possible
to place the blades around the neck, upper arm or
shoulder joint of a person and to release the cutter.
If handled improperly or without due care, persons
might even be killed instantly, or die as a
consequence of serious blood loss. It is therefore
imperative that the splitting saw is handled properly
and according to the instructions in this manual.
Manufacturer's declaration:
The machine cannot generate pressure. Pressure
build-up occurs only in conjunction with the
connected pressure generator and hose
connections. The machine may only be
commissioned if all requirements of the directives
and regulations governing pressurised vessels are
fulfilled.
The machine is designed for a pressure of 200 bar.
The pressure volume in the hook cutter, as well as
in the pressure generator and the supply lines is
⋅
>
(estimate value). Such devices must
p V 240
generally meet the requirements of the Pressure
Vessel Directive 97/23/EC and related diagrams.
Due to the sturdy design ensuring great dimensional
stability and strength, as well as resistance against
static and dynamic stress during operation, article
1.3.10 of the Pressure Vessel Directive 97/23/EC
applies.
As pressure is not a decisive factor when it comes to
the design of the cutter, the EFA hook cutter is not
subject to the above Directive.
1.3 Scope of delivery
Hook cutter
Operating manual
Seite/ Page
3/ 9
Ausführung/ Version
2014
Werbung
Kapitel
Inhaltsverzeichnis
