Operation - Makita DTW181 Betriebsanleitung

ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use
impact
and
size
result
inconsistent fastening torque and/or damage to the
bolt or nut.
Installing or removing impact
socket
Optional accessory
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION:
After inserting the impact socket,
make sure that it is firmly secured. If it comes out,
do not use it.
NOTE: The
socket
depending on
of
on
Tool with the ring spring
For impact socket without O-ring and
pin
►
Fig.8: 1. Impact socket 2. Square drive 3.
Ring spring
Push the impact socket onto the square drive until it
locks into place.
To remove
simply
For impact socket with O-ring and pin
►
Fig.9: 1. Impact socket 2. O-ring 3. Pin
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
square drive. Then return the O-ring to the original
position in the impact socket groove to retain the pin.
the correct
socket for
nuts. An
impact socket
in inaccurate and
way of
installation varies
the
the square
the tool.
the impact
pull it
To remove the impact socket, follow the installation
procedures in reverse.
Tool with the detent pin
►
Square drive
Align the hole in the side of the impact socket with the
size
detent pin on the square drive and push the impact
bolts
socket onto the square drive until it locks into place.
incorrect
Tap it
will
To
simply
it
detent pin while pulling the impact socket.
Installing hook
CAUTION:
secure it with the screw firmly. If not, the hook
may
►
The
temporarily hanging
be installed on either side of the tool. To install the
impact
hook, insert it into a groove in the tool housing on
either side and then secure it with a screw. To remove,
type
loosen the screw and then take it out.
drive

OPERATION

CAUTION:
all the way until it locks in place.
button, it is not locked completely.
socket,
off.
►
Hold
place
the bolt or nut. Turn the tool on and fasten for the
proper fastening time.
The
11 ENGLISH
Fig.10: 1. Impact socket 2. Hole 3.
4. Detent pin
lightly if
remove the
pull it
is hard to remove, depress the
When installing the hook, always
come off
tool and
the personal
Fig.11: 1. Groove 2. Hook 3. Screw
hook is
the
Always insert the battery cartridge
you can
red indicator on the upper side of the
it fully
red indicator
seen. If
may accidentally
out of
causing injury
or someone around
Fig.12
the tool
the impact
proper fastening torque
differ depending upon
required.
impact socket,
off. If
from the
result in
injury.
convenient for
tool. This can
If
see the
Insert
until the
cannot be
not, it
fall
the tool,
to you
you.
firmly and
socket over
may
the