Safety Warnings - Makita DTW181 Betriebsanleitung

Vibration
The vibration
vector
according to EN62841-2-2:
Work mode:
fasteners of
mum capacity
Vibration emission
m/s 2
Uncertainty
m/s 2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and
for
with
NOTE: The declared vibration emission value may
also
a
of
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value
ways
tool is used.
WARNING:
identify
protect the operator that are based on an estimation
of
actual
(taking
parts
operating cycle
the times when the tool is switched off and
when it is running
to
EC Declaration of Conformity
For European countries only
The EC
conformity is
Annex
manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed
in
and/or
total value
sum) determined
impact tightening of
the
of the
(a ) :
h
(K) :
may be
comparing one
another.
be used
preliminary assessment
exposure.
depending on
in which
Be sure
safety measures to
exposure in
conditions of
account of
of the
such
idle in
the trigger
declaration of
included
A to this instruction
below may
electric shock,
serious injury.
Save all warnings and
instructions for future reference.
(tri-axial
The
maxi-
tool
operated (cordless) power
10.5
Cordless impact wrench safety
1.5
warnings
1. Hold the power tool by insulated gripping
surfaces, when performing an operation
used where the fastener may contact hidden wiring.
tool
Fasteners
in
2. Wear ear protectors.
3. Check the impact socket carefully for wear,
cracks or damage before installation.
4. Hold the tool firmly.
the
the
5. Keep hands away from rotating parts.
6. Always be sure you have a firm footing. Be
sure no one is below when using the tool in
to
high locations.
7. The proper fastening torque may differ
depending upon the kind or size of the bolt.
the
Check the torque with a torque wrench.
use
all
SAVE THESE INSTRUCTIONS.
as
WARNING:
with product (gained from repeated use) replace
addition
strict adherence to safety rules for the subject
time).
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
as
battery cartridge
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
result
and even an explosion.
fire
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical
6 ENGLISH
term "power
the warnings
your mains-operated
power tool
contacting a
wire may
metal parts
power tool
could give the operator an electric shock.
DO NOT let comfort or familiarity
tool" in
refers to
(corded)
or battery-
tool.
"live"
make exposed
of the
"live" and