Preparing The Appliance For Use; Filling The Water Tank - Philips Supervapor GC6048 Bedienungsanleitung

- Always place the iron on the iron stand or on its heel. Do not put
the hot iron on the supply hose or the mains cord. Make sure the
cord does not come into contact with the hot soleplate.
- The iron stand and soleplate of the iron can become extremely hot
and may cause burns if touched. If you want to move the steam tank,
do not touch the stand.
- Do not allow the cord to come into contact with the soleplate when
it is hot.
- Infirm persons should not be allowed to use the appliance without
supervision. Keep an eye on children to make sure that they do not
play with the appliance.
- If steam escapes from the filling opening when the appliance is
heating up, switch the appliance off and contact a service centre
authorised by Philips
- Do not open the filling opening of the steam tank when the steam
tank is under pressure. Follow the instructions under 'Fast refill'.

Preparing the appliance for use

1 Check if the voltage indicated on the type plate corresponds to
the mains voltage in your home.
2 Remove any sticker, protective foil or storage cover from the
soleplate.
3 Fully unwind the mains cord (I) and supply hose (H).
4 Place the steam tank (A) on a stable, level surface.
5 Place the iron on the iron stand (P).
Do not place the hot iron on the steam tank, the supply hosed or the
mains cord.The cordset should not be allowed to touch the soleplate
when it is hot.

Filling the water tank

Never immerse the iron or the steam tank in water.
1 Make sure the on/off switch (F) and the 'steam tank on/off'
switch has been set to 'off' and remove the plug from the wall
socket.
C
2 Slowly unscrew the cap (B) of the steam tank by turning anti-
clockwise.
It is possible that there is a vacuum in the cold tank, which may cause a
sound when you remove the cap.This is absolutely normal.
ENGLISH
7