Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Manual tuning
1
Press Function button (6) to select " Tuner " mode.
2
Tune to the required station by pressing the tune " + " or " " button (15,21).
3
Adjust volume up/down button (10,4) to the desired volume level.
Auto tuning
1
Press Function button (6) to select " tuner " mode.
2
Press and hold the tune " + " or " " button (15,21) for 1-2 seconds and then release.
3
The unit will start seeking automatically and stop until a radio station is reached.
4
Repeat step 2 & 3 until the desired radio station is being reached.
5
Adjust volume up/down button (10,4) to the desired volume level.
Preset stations
You can store up to 20 radio stations in the memory Set to tuner mode.
1
Turn to the desired radio station by " manual" or " auto " tuning method.
2
Press the Mem/Clk-adj " button (13) until the " MEM " indicator and preset station number are flash
on LCD display (12)
3
Press " Folder / Pre-up
4
Press " Mem/Clk-adj " button (13) again to confirm the setting.
5
Repeat step 1 to 4 to store other stations.
6
Now you can select the presets stations in order by pressing the "Folder/Pre–up
• The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are
recommended to switch the system into standby mode for convenience usage.
• There are 5 seconds for program state, after 5 sec. This state would resume to normal tuner mode
automatically.
• You can overwrite a present station by storing another frequency in its place.
FM-stereo reception
• Press the " St/Mono " button (18) repeatedly, the FM programs are receiving in mono and stereo
mode repeatedly. In particular when stereo signals are weak.
• It is preferable to receive the program in mono.If stereo signal is being received, the stereo indicator
"
" will appear on LCD display (12) to show FM stereo program is now receiving.
Hints for best reception:
FM : The receiver has a build-in FM wire antenna (24).
16

Listening to Radio

button (14) to select the desired station memory for storage.
" button (14)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1000479810006706

Inhaltsverzeichnis