Radio Functions - auna DS-2 Bedienungsanleitung

RADIO FUNCTIONS

Auto tuning
1. Press function button (19) to select tuner mode.
2. Press and hold the SCAN button. The FM radio search starts and stores
all received stations automatically (max. 30 FM stations).
3. Tune to the desired station by pressing the the skip
button.
4. Adjust volume up/down controls (20) to the desired volume level.
Preset stations
You can store up to total of 40 radio stations in the memory.
1. Set to " tuner " mode.
2. Turn to the desired radio station by " manual" or "auto" tuning method.
3. Press " mem / clk-adj" button (17) to enable program state.
4. Press " folder / pre-up (16) or folder / pre-down
handset) to select the desired station memory position for storage.
5. Press "mem / clk-adj " button (17) again to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
7. Press " folder / pre-up
the preset stations in order.
8. To return normal tuner mode, leave keys free.
The pre-set memories will be cancelled completely if switching off the main
power button on system. You are recommended to switch the system into
standby mode for convenience usage. You can overwrite a present station
by storing another frequency in its place.
FM & FM-stereo reception (by remote handset)
Press the " FM-st/mono " button at remote handset repeatedly, the FM
programs are receiving in mono and stereo mode repeatedly. In particular
when stereo signals are weak. It is preferable to receive the program in
mono.
If a stereo signal is being received, the "st" indicator "
lCD display (21) to show FM stereo program is now receiving.
Hints for best reception
The receiver has a build-in FM wire antenna (26) hanging at the rear cabinet.
This wire should be totally unraveled and extended for the best reception.
or down " button at remote handset to select
or skip
button (at remote
" will appear on
EN
31