Items Supplied; Base Station; Fastening The Base Station - Silvercrest SHAZ 22.2 C4 Bedienungsanleitung

NOTES on the battery
• Only use the original battery charger
(base station) to load the batteries.
• The battery becomes warm during the
charging process. This is normal.

4. Items supplied

1 suction device 18 with dust contain-
er 12
1 base station 34
1 power adapter 32
1 battery 36
1 suction pipe 24
1 floorhead 27
1 small brush nozzle 38
1 large brush nozzle
(length adjustable) 40
1 crevice nozzle 41
1 adapter 42 for small brush nozzle
1 adapter 43 for extension of 38
1 drilling template
1 set of fixing material
(2 rawlplugs, 2 screws)
1 copy of the user instructions

5. Base station

5.1 Fastening the base station

34
Fasten the base station 34 to the wall using
the drilling template and the fixing material
supplied.
NOTE: before fastening, check that the fix-
ing material supplied meets your require-
ments (e.g. wall structure). If not, replace it
with suitable fixing material.
1. Look for a place on the wall for the base
station 34. Make sure that there is a
wall socket nearby.
2. Using the drilling template, draw the
marking for the drill holes on the wall.
3. Drill holes with a diameter of 6 mm us-
ing a drill.
4. Insert the rawlplugs into the drill holes.
5. Tighten the screws in the rawlplugs.
6. Hang the base station 34 up on the
wall and check for a secure hold.
34
25
GB