Sanus Systems VMUC1 Montageanleitung Seite 10

Step 10: Cable management (±110°)
Swivel the Mount Assembly (a) 110° either left or right. You will run the cables in the opposite direction. Cables must be wrapped a
complete 360° inside the base of the Mount Assembly. You can attach the Cable Ties (g) in locations marked in Diagram 8 below.
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
6901-20074_ML.indd 10
cable tie
holder
a
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA (6901-20074 <01>)
Diagram 10
cable path
12/29/06 4:25:55 PM