Easy Series Ovens – Page 29
WATER CONNECTION
It is advisable to use softened water with hardness of 5°f. If the mains water pressure is not within
1 and 3 bar, a pressure reducer must be installed upstream.
There must be a tap to close the water supply between the units and the water mains. The fitting
upstream for the water connection must be compliant with current requirements. The water
connection fitting is located on the back of the unit and is duly marked.
It is advisable to use a hose that is capable of absorbing small changes in pressure.
Before making the connection, let water run out of the pipes.
C = Water discharge - Ø 30 mm
D = Water inlet
- ¾" male