Noise/Vibration Information - Bosch ANGLE EXACT ION 18 V-LI 8-1100 Originalbetriebsanleitung

ANGLE EXACT ION
industrial cordless angle wrench
A)
– during operation and during storage
Recommended batteries
Recommended chargers
Angled screw head (included with the product
as standard)
A) Limited performance at temperatures <0 °C
Article number
Torque, hard/soft screwdriving applica-
tion according to ISO 5393
Tightening torque at the flange
Accessory for ANGLE EXACT ION
Weight according to EPTA-Procedure
01:2014

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power
tool is 70 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
Tightening screws and nuts of the maximum permitted size:
2 2
a < 2.5 m/s , K = 1.5 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
Bosch Power Tools
30 – 300
°C -20 to +50
GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18... W
AL 1814 CV
AL 1820 CV
AL 1860 CV
GAL 1880 CV GAL 1880 CV
GAL 18V-..
GAL 3680 CV GAL 3680 CV
GAX 18V-30
AL3620 CV
GAL 18.. W
■ 3/8"
Angled screw head
■ 1/4" ■ 3/8"
0 607 453 0 607 453 0 607 451
617 620
Nm 20 25
Nm 20 20
15-500 15-500
kg 0.20 0.20
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
40 – 220 50 – 210
-20 to +50 -20 to +50
GBA 18V... GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18... W GAL 18... W
AL 1814 CV AL 1814 CV
AL 1820 CV AL 1820 CV
AL 1860 CV AL 1860 CV
GAL 1880 CV
GAL 18V-.. GAL 18V-..
GAL 3680 CV
GAX 18V-30 GAX 18V-30
AL3620 CV AL3620 CV
GAL 18.. W GAL 18.. W
■ 3/8" ■ 3/8"
■ 3/8"
1/4" Quick-
change
chuck
1/4"
0 607 453 0 607 453
618 618 630
30 20 20
25 20 20
30-300 15-500 15-500
0.30 0.20 0.20
1 609 92A 4R1 | (21.02.2019)
English | 19
60 – 120
-20 to +50
GBA 18V...
GAL 18... W
AL 1814 CV
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 18V-..
GAL 3680 CV
GAX 18V-30
AL3620 CV
GAL 18.. W
■ 3/8"
Straight
screw
head
Quick-
change
chuck
1/4"
0 607 453
631
6
10
15-500
0.20