Tips And Tricks; Maintenance And Cleaning; Disposal - Parkside PBSD 600 A1 Originalbetriebsanleitung

Tips and tricks

■ Never use the same abrasive belt
wood and metal.
■ Worn or cracked abrasive belts can damage
the workpiece. Therefore, be sure to replace
worn abrasive belts before starting work.
■ Always hang up the abrasive belts to store
them, as kinks etc. can make them unusable.

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
off the appliance and pull out the
power plug before starting any
work on the appliance.
The belt grinder is maintenance-free.
■ Always clean the appliance directly after finishing
work.
■ Use a dry cloth to clean the housing. Under no
circumstances should you use fuel, detergents,
solvents or abrasive cleaners.
Emptying/cleaning the dust collector
♦ Pull the dust collector
♦ Empty the dust collector
knocking out the contents and then push the
dust collector back onto the appliance.
♦ Ensure ventilation openings are always free.
♦ Remove any adhering grinding dust with a
brush.
PBSD 600 A1
to work
:
off the appliance.
completely by

Disposal

The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities
can provide information on how to dispose of the
appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
GB │ IE │
21 ■