Werbung
ENGLISH
then 20-30 sec, after that the brake should be
made for about 2 minutes.
• Do not take the pusher (17) out of the neck of
the cap (16) while making the pastry. Other-
wise the particles of the flour would fly out of
the neck of the cap (16).
Beating
1. Install the protecting cap of the blender drive
(1) and turn it anticlockwise up to the stop.
2. Mount the bowl (10) on the processor.
3. Place the beater (14) on the nozzle drive axis
(6).
4. Put the ingredients into the bowl (10).
5. Cover the bowl (10) with the cap (16) and turn
it anticlockwise up to the stop.
6. Insert the power cord plug into the wall out-
let.
7. Switch on the processor by turning the knob
(3) or turn on pulse operating mode by press-
ing the button "PULSE" (4).
8. You can add the necessary ingredients
through the neck of the cap (16) during the
operation.
9. After finishing food processing switch the
appliance off by turning the knob (3) to the
"OFF" position, and disconnect the power
cord plug from the wall outlet.
10. Turn the cap (16) clockwise and remove it,
take the beater (14) out of the bowl (10), de-
tach the bowl (10), and extract the foodstuff
out.
Attention!
• Never use the nozzle (14) for making the pas-
try.
• Do not overfill the bowl with the fluid foodstuff
to avoid overflowing.
Citrus juicer
1. Install the protecting cap of the blender drive
(1) and turn it anticlockwise up to the stop.
2. Mount the bowl (10) on the processor.
3. Place the citrus juicer separator (18) into the
bowl (10) and turn it anticlockwise up to the
stop.
4. Place the citrus juicer cone (19) on the nozzle
drive axis (6).
5. Insert the power cord plug into the wall out-
let.
6. Turn the knob (3) to switch the processor on
and set the rotation speed "1".
1616new.indd 6
1616new.indd 6
7. After finishing food processing switch the
appliance off by turning the knob (3) to the
"OFF" position, and disconnect the power
cord plug from the wall outlet.
8. Turn the citrus juicer separator (18) clockwise
and remove it, pour the squeezed juice out of
the bowl (10).
Attention!
While operating the citrus juicer it is forbid-
den to choose the rotation speed higher
then "1".
Juicer
1. Install the protecting cap of the blender drive
(1) and turn it anticlockwise up to the stop.
2. Mount the bowl (10) on the processor.
3. Place the juicer with the separator (20) into
the bowl (10).
4. Cover the bowl (10) by the juicer cap (21) and
turn it anticlockwise up to the stop.
5. Insert the power cord plug into the wall out-
let.
6. Turn the knob (3) to switch on the processor
and set the rotating speed "Max", or turn on
pulse operating mode by pressing the button
"PULSE" (4).
7. Put the foodstuff into the neck of the cap (21).
Use the pusher (22) to deliver the foodstuff.
Press on the pusher slightly to pass the food-
stuff through the neck.
8. To remove the cake during the operating:
- switch the processor off by turning the knob
(3) to the "OFF" position, and disconnect the
power cord plug from the wall outlet;
- turn the cap of the juicer (21) clockwise to
open it;
- take the juicer with the separator (20) out of
the bowl (10) and remove the cake.
9. Assemble the juicer and continue operating.
10. After finishing food processing switch the
appliance off by turning the knob (3) to the
"OFF" position, and disconnect the power
cord plug from the wall outlet.
11. Turn the juicer cap (21) clockwise and remove
it.
12. Take the juicer with the separator (20) out of
the bowl (10).
13. Remove the bowl (10) and pour the squeezed
juice out of it.
6
18.07.2008 12:19:35
18.07.2008 12:19:35
Werbung
