Warning! :
Only technically qualified service centres can perform the operations described
below!
Warning! :
Before resetting the safety thermostat, it is always necessary to eliminate the problem
causing its activation!
Even a normal use of the appliance may cause operation inconveniences and failures.
The most common problems are the following:
P
AN DOES NOT REACH SET TEMPERATURE
Possible causes:
- Check connections to the switch.
- Check connection to the working thermostat.
- Check connection to electromagnetic switch.
- Heating elements are burned.
S
IGNAL LAMPS DO NOT LIGHT UP
- Check the connection to the switch.
- Signal lamp is faulty.
THE BRATT PAN WORKS WITH DISCONNECTED THEMOSTAT
- Electromagnetic switch contacts are cut off.
L
OW EFFICIENTY OF THE PAN
- Check the heating elements.
Manuale d'istruzione per l'installazione, la manutenzione e l'uso
Brasiere elettriche BS80.E7 / BS8.E7
2.4.1. POSSIBLE FAILURES AND THEIR ELIMINATION
:
05.11.02
pagina
44