Positioning; Installation - TECNOINOX BS80FE7 Installationswartungs Und Gebrauchshandbuch

- Remove all the packaging and check that the appliance is in perfect conditions. In case of visible
damage, do not connect the appliance and notify the sales point immediately.
- Remove the PVC protection from the panels.
- Dispose of packaging according to regulations. Generally material is divided according to composition
and should be delivered to the waste disposal service.
- There are no special instructions regarding distances from other appliances or walls, however it is
advisable to maintain a sufficient distance to allow any servicing operations to be performed. In the event
the appliance should be installed in direct contact with inflammable walls, it is advisable to fit a suitable
heat insulation.
- The appliance must stand level. Small differences in level can be eliminated by screwing or unscrewing
the adjustable feet: A significantly uneven or sloping stance can affect the operation of the appliance
adversely.
Warning! : Only qualified technicians must perform the installation, maintenance and test of the
appliance.
Warning! : Before connecting any parts of the appliance to supplies, make sure that the latter is
equivalent the requirements stated in the technical data plate, if the appliance has
been designed for these supplies.
Manuale d'istruzione per l'installazione, la manutenzione e l'uso
Brasiere elettriche BS80.E7 / BS8.E7
2.1. POSTIONING

2.2. INSTALLATION

05.11.02 pagina 41