Ferm CSM1037 Bersetzung Der Orginalbetriebsanleitung Seite 3

CIRCULAR SAW
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The pictures mentioned in the text are
corresponding with the pictures at page 2
For your own safety and for the safety of
others, please read these instructions
carefully before using this appliance. It
will help you understand your product
more easily and avoid unnecessary
risks. Keep this instruction manual in a
safe place for future use.
Contents
1. Machine data
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. MACHINE DATA
Technical specifications
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeth
Max sawing depth 90°
Max sawing depth 45°
IP Class
Weight
Lpa (sound pressure level) 92.8+3 dB(A)
Lwa (sound power level)
aw(vibration value)
Vibration level
The vibration emission level stated in this
Ferm
230 V
50 Hz
1200 W
5500/min
Ø185xØ20x2.4 mm
Z24
65 mm
43 mm
IP 20
3,47 kg
103.8+3 dB(A)
3.787+1.5 m/s
2
instruction manual has been measured in
accordance with a standardised test given in EN
60745; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns
Product information
Fig. A
1. Handgrip
2. On/off switch
3. Cut depth clamping knob
4. Power cord
5. Saw blade safety guard
6. Hexagon screw
7. Soleplate
8. Retaining ring
9. Saw blade
10. Rip fence
11. Rip fence clamping knob
12. Sawing angle clamping knob
13. Shaft locking knob
14. Protractor
15. Knob
16. Safety switch
17. Carbon brush screw
Contents of packing
1 Circular handsaw
1 Rip fence
1 TCT Saw blade Ø185 mm
1 Allen key
1 Set carbon brushes
Check first whether or not the delivery has been
damaged by transport and/or whether all the
parts are present.
2. SAFETY INSTRUCTIONS
Explanation of the symbols
EN
3