K-FEE ONE Betriebsanleitung Seite 53

In off /standby mode, press the milk
5
button and the lungo buttons simul-
taneously for at least 3 seconds (this pla-
ces the machine programming into the
descaling mode and will function in cold
water). Once in descaling mode, press the
milk button at intervals of 30 seconds as
often as required until the water tank is
empty.
5
WARNING
If you descale the appliance
only a short time after prepa-
ring a drink, the discharged descaling
liquid can be very hot at the beginning -
scalding hazard.
After this, please empty, rinse out and
6
clean the water tank and the collecting
container.
K-FEE_One-3-Button_BDA_DE_EN_KV_RZ_20190806_Nullserie.indd 25
Reinsert the water fi lter if applicable
7
(optional). Fill the water tank with fresh
water and replace it in the appliance.
7
min.
3 sec.
Rinse the appliance with fresh water
8
by pressing the milk button as often as re-
quired until the water tank is empty. Refi ll
this with fresh water, empty and clean the
collecting container and replace the drip
tray under the spout
8
To conclude you will have to exit the
9
descaling program. To do this, press
the milk button and the lungo button
simultaneously for at least 3 seconds
again. The appliance will fi nally switch off .
25
07.08.2019 14:53:38