Resetting To Factory Settings - K-FEE ONE Betriebsanleitung

Resetting to factory settings

INFO
Resetting the appliance to
the factory settings deletes
your individual settings for
cup capacity.
Allow the appliance to go into the
1
automatic off /standby mode (automatic
switch-off 90 seconds after last use).
Now press the espresso button
2
and the milk button simultaneously,
and keep the buttons pressed for at
least 3 seconds. Release the button.
Both buttons will blink briefl y once to
confi rm resetting to factory settings.
INFO
The factory setting is 90 seconds in order to avoid unnecessary energy
consumption and to protect the environment. This means that the applian-
ce automatically switches itself off after 90 seconds of non-use. This means that your
K-fee® – your system capsule machine uses considerably less energy: the appliance
consumes considerably less power (less than 0.5 W) than it does in operating mode.
During periods of absence and at the end of the brewing day, switch the appliance
off at power supply (240 V plug).
K-FEE_One-3-Button_BDA_DE_EN_KV_RZ_20190806_Nullserie.indd 17
2
min.
3 sec.
17
07.08.2019 14:53:27