Battery Charger; Structure And Functions - Comet Spa CRS 75 BT Bedienungsanleitung

gases); therefore, it is highly recommended.
It should not be taken for granted that batteries
and battery chargers with the same technical fea-
tures as those we offer will produce the same results.
Only perfect compatibility between these elements
(Pb-Acid batteries, gel batteries and battery chargers)
will safeguard the performances, the service life, the
safety and the economic value invested.
5.1.2

BATTERY CHARGER

This type of high-frequency battery charger efficiently
charges batteries, extending their operating and ser-
vice life. In addition, because they can be configured,
it is a very versatile solution; the same battery charger
can be used for both Pb-Acid batteries and for gel bat-
teries.
It should not be taken for granted that batteries
and battery chargers with the same technical fea-
tures as those we offer will produce the same results.
Only perfect compatibility between these elements
(Pb-Acid batteries, gel batteries and battery chargers)
will safeguard the performances, the service life, the
safety and the economic value invested.
5.2

STRUCTURE AND FUNCTIONS

5.2.1 MACHINE
Photo A
1 Recovery tank
2 Operator's seat
3 Solution tank
4 Rear wheel
5 Bumper wheel
6 Splash guard
7 Front steering motorwheel
8 Compartment for electric components
9 Steering wheel
Photo B
1 Blinker
2 Recovery water tank drain hose
3 Recovery water tank drain hose plug
4 Solution water tank filler plug
5 Suction hose
6 Rear cover of the suction compartment
Photo C
1 Blinker
2 Opening knob of the suction
compartment
3 Rear cover of the suction compartment
4 Suction motor compartment
5 Suction filter
Photo D
1 Solution water tank drain valve
Photo E
1 Squeegee bumper wheels
2 Squeegee pressure adjusting knob
3 Squeegee fast fixing knob
4 Squeegee inclination adjusting knob
5 Suction hose
6 Squeegee blades replacement knobs
7 Squeegee wheels
Photo F
1 Solution water filter
Photo G
1 Battery compartment with 6V batteries
2 Suction motor
3 On- board battery charger
Photo H
1 Chopper control board
2 Traction motor fuse
3 Suction motor fuse
4 Brush motor fuse
Photo I
1 Battery charger cover
2 Red LED - Battery discharged
3 Green LED - Full charged battery
4 Dip-Switches
5 Plastic cap to access the Dip-Switches
6 Dip-Switches for PB-Acid/GEL battery
setting
7 Table with Dip-Switch settings for
PB-Acid/GEL charging curve
Photo L1
1 Electromechanical brake fork lever
Photo L2
1 Unblocking lever
2 Pin
Photo L3 - L4 - L5
Electromechanical brake unblocking procedure
Photo M
1 Key switch
2 Traction speed increase push button
3 Traction speed reduce push button
4 Suction motor operating push button
Squeegee lifting/lowering
(XS-R/A13R UP-Kron Zero-R Plus)
5 Brush motor operating push button
Brush plate lifting/lowering
(XS-R/A13R UP-Kron Zero-R Plus)
6 Forward/reverse traction selector
7 Brush motor thermal breaker
34