Maintenance And Cleaning; Protection Of Plastic Surfaces; Door Glasses - Beko CNE 47520 GB Bedienungsanleitung

6

Maintenance and cleaning

A
Never use gasoline, benzene or
similar substances for cleaning
purposes.
B
We recommend that you unplug the
appliance before cleaning.
B
Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
C
Use lukewarm water to clean the
cabinet of your refrigerator and wipe it
dry.
C
Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
B
Make sure that no water enters the
lamp housing and other electrical
items.
B
If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
C
Check door seals regularly to ensure
they are clean and free from food
particles.
A
To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Protection of plastic
surfaces
C
Do not put the liquid oils or oil-cooked
meals in your refrigerator in unsealed
containers as they damage the
plastic surfaces of your refrigerator. In
case of spilling or smearing oil on the
plastic surfaces, clean and rinse the
relevant part of the surface at once
with warm water.

Door Glasses

C Remove the protective foil on the
glasses.
C There is a coating on the surface of
the glasses. This coating minimizes
the stain build-up and helps to
remove the possible stains and dirt
easily. Glasses that are not protected
with such a coating may be subject
to persistent binding of air or water
based organic or inorganic dirt such
as limescale, mineral salts, unburned
hydrocarbons, metal oxides and
sliciones that can easily and quickly
cause stains or material damage.
Keeping the glass clean becomes too
difficult despite the regular cleaning.
Consequently, the appearance
and the transparency of the glass
deteriorates. Harsh and corrosive
cleaning methods and compounds
will intensify these defects and speed
up the deterioration process.
C Water-based cleaning products that
are not alkaline and corrosive must be
used for regular cleaning purposes.
C Non-alkaline and non-corrosive
materials must be used for cleaning
so that the service life of this coating
lasts for a long time.
C These glasses are tempered to
increase their durability against
impacts and breaking.
C A safety film is also applied to their
rear surfaces as an extra safety
measure in order to prevent them
from causing damage to their
surrounding in case of a breakage.
*Alkali is a base that forms hydroxide ions
(OH¯) when it is dissolved in water.
Li (Lithium), Na (Sodium), K (Potassium)
Rb (Rubidium), Cs (Cesium) and
artificial and radioactive Fr (Fan-sium)
metals are called ALKALI METALS.
20
EN