Werbung
6
Before Use (2)
Beware of condensation
When the unit (or a disc) is moved from a cold to a
warm place, or used after a sudden temperature
change, there is a danger of condensation; vapor in
the air could condense on the internal mechanism,
making correct operation impossible. To prevent
this, or if this occurs, leave the unit for one or two
hours with the power turned on. The unit will
stabilize at the temperature of its surroundings.
Maintenance
If the surface of the unit gets dirty, wipe with a soft
cloth or use diluted neutral cleaning liquid. Be sure
to remove any fluid completely. Do not use thinner,
benzine or alcohol as they may damage the surface
of the unit.
RESET Switch
In the following cases, function buttons may not
work properly.
M When the system is damaged by some electrical
shock.
M When the power is irregular or has electrical
noise.
In these cases, press the RESET switch once or
twice lightly with a pencil or a ball-point pen when
the unit is on.
ENGLISH
Werbung
Kapitel
