Safety Instructions - Parkside WELDER PISG 120 A1 Bedienungs- Und Sicherheitshinweise

Safety instructions

z Safety instructions
Please carefully read the instruc-
tions for use and follow the spec-
ified notices. Familiarise yourself
with the tool, its proper use and
the safety notices using these in-
structions for use. The nameplate
contains all the technical data for
this welding tool, please learn
about the technical facts of this
tool.
This device may be used by
„
children aged 16 years and
up, as well as by persons with
reduced physical, sensory or
mental capacities, or lacking
experience and / or knowl-
edge, so long as they are
supervised or instructed in the
safe use of the device and un-
derstand the associated risks.
Do not allow children to play
with the appliance. Cleaning
and user maintenance should
not be performed by children
without supervision.
Only have repairs and / or
„
maintenance performed by
electrically skilled persons.
Only use the welding cables
„
included (PISG 120 A1,
H01N2-D1x10 mm
During use the equipment
„
should not be located directly
8 GB
„
„
„
).
2
„
against a wall, be covered,
or be jammed between other
equipment to ensure ample air
can be taken in through the
ventilation louvres. Verify the
equipment is correctly connect-
ed to the mains voltage. Avoid
any tensile load on the mains.
Unplug the mains plug from
the socket before transferring
the equipment to a different
location.
Always switch the equip-
ment off with the ON / OFF
switch when not in use. Set
the electrode holder down on
an insulated pad and allow
to cool for 15 minutes before
removing the electrodes from
the holder.
Pay attention to the condition
of the welding cables, the elec-
trode holders and the earth
terminals. Worn insulation and
conducting parts can produce
hazards and reduce the weld-
ing quality.
Arc welding produces sparks,
melted metal parts and smoke.
Therefore note: Remove any
flammable substances and
/ or materials from the work
area and its immediate sur-
roundings.
Ensure the work area is venti-
lated.