Information About Warranty And Service Processing; Warranty Terms; Extent Of Warranty - Parkside WELDER PISG 120 A1 Bedienungs- Und Sicherheitshinweise

Maintenance and Cleaning / Information about warranty and service ...
Before performing maintenance work or
„
repairs on the welding tool, disconnect
the power cable
to ensure the tool is safely isolated from
the power supply.
Clean the exterior of the welding tool
„
regularly. Use compressed air, cotton
waste or a brush to remove dirt and dust.
Note: The following kinds of maintenance
work must be performed only by suita-
bly-qualified personnel.
Current regulators, earthing equipment,
„
internal cables, the blowpipe coupler
and adjusting screw should be main-
tained regularly. Tighten loose screws
and replace rusty screws (M4 × 10
replacement screws are available from
your local DIY store.).
Regularly check the leakage resistance of
„
the welding tool. Use suitable measuring
instruments for this purpose.
In the event of a defect or if components
„
need to be replaced, please contact the
correspond ing professional.
z Information about
warranty and service
processing
Creative Marketing & Consulting
GmbH warranty
Dear customer, the warranty for this device
is 3 years from the date of purchase. In the
event of product defects, you have legal
rights against the retailer of this product.
Your statutory rights are not limited in any
way by our warranty detailed below.
z Warranty terms
The warranty period begins on the date of
purchase. Please retain the original receipt
16 GB
from the power outlet
10
safely. This document is required as your
proof of purchase.
Should this device show any fault in ma-
terials or manufacture within three years
from date of purchase, it will be repaired
or replaced - at our choice - by us free of
charge. This warranty is conditional on the
defective device and the receipt of purchase
(store receipt) being presented within the
three year warranty period, and that there
is a brief written description of the nature of
the defect and of the date it arose.
If the defect is covered by our warranty,
we will return the repaired equipment or
replacement thereof. A repair or exchange
of the equipment does not extend a new
warranty period.
z Extent of warranty
The appliance has been manufactured to
strict quality guidelines and meticulously
examined before delivery.
The warranty applies to faults in material or
manufacture. This warranty does not apply
to product parts subject to normal wear and
tear and which can therefore be considered
as wear items, or to damage to fragile parts,
e.g. switches, storage batteries or glass
parts.
This warranty becomes void if the device
has been damaged or improperly used or
maintained. All instructions provided in the
operating instructions must be followed strict-
ly to constitute proper use of the product.
Purposes and practices which the operating
instructions warn of or advise against must
be avoided without fail.
This product is intended for private, non-com-
mercial use only. Any incorrect or improper
use of the device, use of force and changes