Introductory Information; Legal Notices; Safety Precautions - HP Designjet 3D Printer Einführende Informationen

Introductory Information

Other sources of information
A complete guide to your printer, is available on the DVD that comes with your printer and on the web
(http://www.hp.com/go/3dprinter/knowledgecenter/). That guide provides information on the
following topics:
• Printer specifications
• Printing
• Reloading material
• Adding a second material bay at a later date
• Maintaining the printer
• Troubleshooting printer issues
• HP Customer Care
You can also find legal and warranty information on the DVD. Further information is available at the HP
customer web site (http://www.hp.com/go/3dprinter/knowledgecenter/).

Legal notices

© 201 1 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP Products and services are set forth in the express
warranty statement accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.

Safety precautions

The following precautions ensure the proper use of the printer and prevent the printer from being
damaged. Follow these precautions at all times.
• Use the power supply voltage specified on the nameplate. Avoid overloading the printer's electrical
outlet with multiple devices.
• Ensure the printer is well-grounded. Failure to ground the printer may result in electrical shock, fire and
susceptibility to electromagnetic interference.
• Before disassembling or repairing the printer yourself, contact your local Service Representative. See
Support section of User Guide.
• Use only the power cord supplied with the printer. Do not damage, cut or repair the power cord. A
damaged power cord has risk of fire and electric shock. Replace a damaged power cord with an
approved power cord.
• Do not allow metal or liquids to touch the internal parts of the printer. Doing so may cause damage,
fire, electric shock or other serious hazards.
• Power off the printer and disconnect the power cord from the power outlet in any of the following cases:
• If there is smoke or an unusual smell coming from the printer.
• If the printer is making an unusual noise not heard during normal operation.
• A piece of metal or a liquid touches the internal parts of the printer.
• During an electrical (thunder/lightning) storm
• During a power failure
2