Cleaning; Maintenance - Parkside Performance Pssap 20-Li B2 Bedienungs- Und Sicherheitshinweise

Flush cuts
(Fig. K)
With elastic bi-metal saw blades you can
¾
separate water pipes, for example, flush to
the wall.
Make sure that the saw blade is always
¾
longer than the pipe diameter. There is a risk
of kickback and personal injury.
˜ Cleaning and care
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the
product cool down before performing
inspection, maintenance and cleaning
work!
˜ Cleaning
Never allow fluids to get into the product.
¾
The product must always be kept clean, dry
¾
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
¾
safe use and prolong the life of the product.
Clean the product with a dry cloth. Use a
¾
soft brush for areas that are hard to reach.
In particular clean the air vents after every
¾
use with a cloth and soft brush.
The vents must always be clear.
¾
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
˜ Maintenance
The product is maintenance-free.
¾
Before and after each use, check the product
¾
and accessories (e.g. saw blades) for wear
and damage. If required, exchange them
for new ones as described in this instruction
manual. Observe the technical requirements
(see "Technical data").
Check covers and safety devices for
¾
damages and correct installation. Replace as
necessary.
Replace a blunt or bent saw blade or one
¾
which has been damaged in some other
way.
˜ Repair
This product does not contain any parts that can
be repaired by the user. Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired.
GB/IE 39