Inserting The Saw Blade - Parkside Performance PSSAP 20-Li B2 Bedienungs- Und Sicherheitshinweise

Connect the power cord with power plug 15
¾
of the charger 14 to the socket.
When the battery pack 8 is fully charged:
¾
Remove the battery pack from the charger
14. Then disconnect the power cord with
power plug 15 of the charger from the
socket.
˜ Adjusting the base plate
(Fig. E)
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the product
cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
m
CAUTION! RISK OF INJURY!
Remove the saw blade from the product
u
before adjusting the base plate 4
(see "Inserting/removing the saw blade").
Do not use the product without having
u
inserted the base plate 4 .
To adapt to the workpiece, the base plate 4 can
be adjusted and swivelled to different positions.
Unlock the base plate 4 : Turn the locking
¾
lever 1 in a counter-clockwise direction.
36 GB/IE
Adjust the desired position of the base plate
¾
4 by pushing it in or pulling it out.
Lock the base plate 4 : Turn the locking
¾
lever 1 in a clockwise direction.
˜ Inserting/removing the saw
blade
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the product
cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
m
CAUTION! RISK OF INJURY!
Do not use any blunt, bent or damaged
u
saw blade.
Always install a suitable saw blade for
u
the job.

Inserting the saw blade

(Fig. F)
Turn the chuck ring 2 in a counter-clockwise
¾
direction.
Insert the saw blade into the saw blade
¾
holder 3 .
Release the chuck ring 2 and let it return to
¾
its original position.
Before use: Pull on the saw blade and check
¾
if it is inserted safely and tightly.