Door Glasses - Blomberg MDND 1880 Bedienungsanleitung

Door Glasses

CRemove the protective foil on the
glasses.
CThere is a coating on the surface of
the glasses. This coating minimizes the
stain build-up and helps to remove the
possible stains and dirt easily. Glasses
that are not protected with such a coating
may be subject to persistent binding of air
or water based organic or inorganic dirt
such as limescale, mineral salts, unburned
hydrocarbons, metal oxides and sliciones
that can easily and quickly cause stains
or material damage. Keeping the glass
clean becomes too difficult despite the
regular cleaning. Consequently, the
appearance and the transparency of the
glass deteriorates. Harsh and corrosive
cleaning methods and compounds will
intensify these defects and speed up the
deterioration process.
CWater-based cleaning products that are
not alkaline and corrosive must be used
for regular cleaning purposes.
CNon-alkaline and non-corrosive
materials must be used for cleaning so
that the service life of this coating lasts for
a long time.
CThese glasses are tempered to increase
their durability against impacts and
breaking.
CA safety film is also applied to their
rear surfaces as an extra safety measure
in order to prevent them from causing
damage to their surrounding in case of a
breakage.
*Alkali is a base that forms hydroxide ions
(OH¯) when it is dissolved in water.
Li (Lithium), Na (Sodium), K (Potassium)
Rb (Rubidium), Cs (Cesium) and artificial
and radioactive Fr (Fan-sium) metals are
called ALKALI METALS.
24
EN