Herunterladen Inhalt Inhalt Diese Seite drucken

Adjustable Bottle Holder; Installing The Adjustable Bottle Holders - Blomberg MDND 1880 Bedienungsanleitung

Kühlschrank/ gefrierschrank
Vorschau ausblenden Andere Handbücher für MDND 1880:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29

Adjustable bottle holder

You can use the adjustable bottle
holders without sacrificing any place
by sliding them to left or right or by
interlacing them.
Horizontal wires
Installing the adjustable
bottle holders
You mast install the holders into the
channels in the following order in order
to use them appropriately.
-Bottle holder that will remain at the
left side must be installed to the front
channel in the rail.
-Bottle holder that will remain in the
middle must be installed to the middle
channel in the rail.
-Bottle holder that will remain at the
rear side must be installed to the rear
channel in the rail.
Verify the position of the horizontal
wires during installation.
Breakfast Compartment
Because products such as fish,
red meat, chicken mean, and dairy
products such as cheese, yoghurt and
milk need to be kept in an ambient
a few degrees cooler than the fridge
compartment, it is recommended to
store these goods in the breakfast
compartment. It is not recommended
to place fruit and vegetables in the
breakfast compartment. Especially
tomatoes, eggplants, zucchinis,
cucumbers and lemons are sensitive
to the cold. They should not be stored
in the breakfast compartment.
You can increase the inner volume
of your refrigerator by removing the
breakfast compartment.
1. Pull the compartment towards
yourself until it rests and stops against
the stopper.
2. Lift the front section and pull towards
yourself to remove the compartment
from its seating.
18
EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mdnd 1880a+++Mdnd 1881a++

Inhaltsverzeichnis