1. Marks for handle positions
Note: You can set the upper handle to 1 of 3 positions.
Line up the mark to 1 of the 3 marks on the inner side
of the upper handle lock (Figure 6).
2
Assembling the Grass Box
No Parts Required
Procedure
Important: Follow the steps in the order shown.
1. Slide the side into the latches in the top (Figure 7).
2. Slide the other side into the latches in the top and
latch the rear of the 2 sides together (Figure 8).
Figure 6
Figure 7
3. Starting at the rear, align and push the remainder of
the side latches together (Figure 9).
5
Figure 8
Figure 9
Figure 10