Command Format C - KERN KXS-TM Betriebs Und Installationsanleitung

Should it be sent continuously, the command must be preceded by %.
If stable weight values are to be sent, the command must be preceded by #.
Command Description (RJ, RK, RL, RS)
RJ
RK
RL
RS Show tolerance limit
RS
: Class (00 ~ 99) *  : LO or HI
HI
LO
Example:
* depending on model

13.5.3 Command Format C

Host Command+ Data
Slave
WS Set tolerance limit
WS XXXXXX
: Class (00 ~ 99) *  : LO or HI XXXXXX: Enter the limit value
HI
LO
Example:
* depending on model
56
Hi/ Lo/ OK status
Lo (001)
OK (010)
Hi (100)
Display of the adjusted upper limit value
Display adjusted lower limit value
Command RS02LO<CR><LF>
Response RS02LOXXXXXX<CR><LF>
Enter the value for the upper limit
Enter the value for the lower limit
Command WS00HI001000<CR><LF>
Response WS00HI001000<CR><LF>
Sample display
001+ 2.000
010+ 3.000
100+ 4.000
Command+ Data
KXS_KXG-TM-BA_IA-e-1932