Overview Verified Weighing Systems (Adjustment Switch In Position , See Chap. 7.9) - KERN KXS-TM Betriebs Und Installationsanleitung

11.2 Overview verified weighing systems
(Adjustment switch in position <Lock>, see chap. 7.9)
Menu block Menu item
Main menu Submenu
SEt h
P0 ChK
Weighing with
sEt L
tolerance range
PCS h
PCS L
bEEP
P2 CoM ModE
Interface
parameter
bAud
Pr
rPS
PTYPE
LAb
Prt
LAnG
rtC
rtCFO
rS485
bLAnK
50
Available settings / explanation
Upper limit value „Tolerance check weighing", input see
chap. 10.5.1
Lower limit value „Tolerance check weighing", input see
chap. 10.5.1
Upper limit value „Tolerance check counting", input see
chap. 10.5.2
Lower limit value „Tolerance check counting", input see
chap. 10.5.2
Acoustic signal for weighing with tolerance
no
range switched off
Acoustic signal when weighed load is within
oK*
tolerance limits
Acoustic signal when weighed load is beyond
nG
tolerance limits
One output for stable weighing value. Return to
St1*
zero needed between values.
One output for stable weighing value. No return
St2
to zero needed between values.
Continuous data output of stable weighing
StC
values
An issue takes place after pressing the PRINT
Pr1
key.
Manual totalizing, see chap. 10.2
The weight value will be added into the
Pr2
summation memory and issued after the M+-key
was pressed.
For automatic totalizing see chap. 10.3
This function is used to issue and add individual
Auto
weighing values automatically to the summation
memory on unloading of weighing scale.
For remote control commands, see chap. 13.4
CoMAnd
Cont Continuous data output
Available baud rate: 600, 1200, 2400, 4800, 9600*, 19200
E71
7 bits, even parity
o71 7 bits, odd parity
n81* 8 bits, no parity
Continuous data transfer
Select interval 1, 2, 4, 8 16 or MAX*
PtUP*
Standard printer setting
LAb x
Data output format, selectable 0*, 1, 2, 3
Prt x For sample logs see chap. 13.2
ENG* Standard settings English
How to set date/time
Set format for date, selectable
<year_month_day> or <day_month_year>
Enter ID for RS485 interface
off*
Print a blank line on output format
on
KXS_KXG-TM-BA_IA-e-1932