Setup Steps - LaCie Little Disk Hi-Speed USB 2.0 Kurzanleitung

Setup Steps

1. Remove the cap and pull out the
USB 2.0 cable.
2. Connect the USB 2.0 cable to
your computer.
3. The Little Disk will power on and
mount on your desktop (Mac) or
in My Computer (Windows) in a
few seconds.
NOTE: User Manual and utilities are pre-loaded on the Little Disk.
The LaCie Little Disk is pre-formatted as a FAT 32 volume, ready for immediate
cross-platform use with Mac and Windows. Please refer to the User Manual
pre-loaded on the drive for information about formatting your LaCie Little Disk.
QIG_LittleDisk_1.8_USB_070716.in4 4
USB extension
cable included.
7/16/07 1:42:15 PM