Equipment; Interior Light - Electrolux IK225SR: IK225SL: IK227SR: IK227SL: IK293SR: IK293SL Benutzerinformation

Equipment

You can re-arrange the storage
shelves as required.
Lift the glass shelf, align the recess
over the support and replace the
shelf in a higher or lower position.
Sectioned shelf
If you need to make space for
tall containers, simply slide
the front half of the sectioned
glass shelf carefully under-
neath the back half.
Adjusting the insertion
height of the sectioned
shelf
Remove the supporting strips
and place on the supports
above or below the previous
position.
Repositioning the door racks
Lift door rack vertically, lift out to the front and
re-insert at a different height, following these
steps in the reverse order.
Bottle grid
(IK293 S only)
66
Remove the roller rails for
cleaning.

Interior light

The interior light will always switch on
when the appliance door is opened.
The light intensity of the LED light
corresponds to laser class 1/1M.
Important
The light cover may only be removed
by customer service staff.
If the cover is removed, do not look
directly at the light through optical
lenses from close distance. This can
damage your eyes.